| 概要 |
EL7342 EtherCAT终端可以直接操作两个直流电机。它在电流上与E-bus隔离。速度或位置由自动化设备通过16位值指定。增量编码器的连接可以实现简单的伺服轴。输出级具有过载和短路保护，常见的热过载警告同时适用于两个输出级。EtherCAT终端有两个通道，通过发光二极管指示它们的信号状态。led可实现快速的局部诊断。 |
| 技术数据 |
| Technical data |
EL7342 |
| Technology |
compact drive technology |
| Connection method |
direct motor connection |
| Number of inputs |
1 x end position, 1 x encoder per channel |
| Load type |
DC brush motor, inductive |
| Number of channels |
2 |
| Number of outputs |
1 x DC motor per channel |
| Supply voltage electronics |
24 V DC (via power contacts) |
| Supply voltage power |
8…48 V DC (external) |
| Output current |
max. 3.5 A per channel |
| Performance increase |
yes, through ZB8610 fan cartridge |
| Output current with ZB8610 |
max. 6.5 A per channel |
| PWM clock frequency |
32 kHz with 180° phase shift each |
| Duty factor |
0…100 % (voltage-controlled) |
| Resolution |
max. 10 bit current, 16 bit speed |
| Encoder input signal |
5…24 V DC, typ. 5 mA, single-ended |
|
| Housing data |
EL-24-2x8pin |
ES-24-2x8pin |
| Design form |
compact terminal housing with signal LEDs |
terminal housing with pluggable wiring level |
| Material |
polycarbonate |
| Dimensions (W x H x D) |
24 mm x 100 mm x 68 mm |
| Installation |
on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of |
double slot and key connection |
| Marking |
labeling of the BZxxx series |
| Wiring |
solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver |
| Connection cross-section |
s*: 0.08…2.5 mm², |
s*: 0.08…1.5 mm², |
| st*: 0.08…2.5 mm², |
st*: 0.08…1.5 mm², |
| f*: 0.14…1.5 mm² |
f*: 0.14…1.5 mm² |
| Connection cross-section AWG |
s*: AWG 28…14, |
s*: AWG 28…16, |
| st*: AWG 28…14, |
st*: AWG 28…16, |
| f*: AWG 26…16 |
f*: AWG 26…16 |
| Stripping length |
8…9 mm |
9…10 mm |
| Current load power contacts |
Imax: 10 A |
| *s: solid wire; st: stranded wire; f: with ferrule |
|
|
| |
|
|
 |
|
 |
产品样本 |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
